2034h Upper Voltage Error Level [mV] Function This object contains the threshold value for the "overvoltage" error in millivolts. Object description Index 2034h Object name Upper Voltage Error Level [mV] Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: application Access read / write PDO mapping no Allowed values Preset value Firmware version FIR-v1426 Change history Firmware version FIR-v2542-B1080909: entry "Object Name" changed from "Upper Voltage Warning Level" to "Upper Voltage Error Level [mV]". Description If the input voltage of the controller exceeds this threshold value, the motor is switched off and an error triggered. As soon as the input voltage is again smaller than the voltage of object 2034h minus 2 volt, you can reset the error via the controlword.
2034h Upper Voltage Error Level [mV] Function This object contains the threshold value for the "overvoltage" error in millivolts. Object description Index 2034h Object name Upper Voltage Error Level [mV] Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: application Access read / write PDO mapping no Allowed values Preset value Firmware version FIR-v1426 Change history Firmware version FIR-v2542-B1080909: entry "Object Name" changed from "Upper Voltage Warning Level" to "Upper Voltage Error Level [mV]". Description If the input voltage of the controller exceeds this threshold value, the motor is switched off and an error triggered. As soon as the input voltage is again smaller than the voltage of object 2034h minus 2 volt, you can reset the error via the controlword.
Object description Index 2034h Object name Upper Voltage Error Level [mV] Object Code VARIABLE Data type UNSIGNED32 Savable yes, category: application Access read / write PDO mapping no Allowed values Preset value Firmware version FIR-v1426 Change history Firmware version FIR-v2542-B1080909: entry "Object Name" changed from "Upper Voltage Warning Level" to "Upper Voltage Error Level [mV]".
Description If the input voltage of the controller exceeds this threshold value, the motor is switched off and an error triggered. As soon as the input voltage is again smaller than the voltage of object 2034h minus 2 volt, you can reset the error via the controlword.
